Gigabyte X299-WU8 User Manual page 31

B_
B_
12) LED_C1/LED_C2 (RGB (RGBW) LED Strip Headers)
The headers can be used to connect a standard 5050 RGB (RGBW) LED strip (12V/G/R/B/W), with maximum
power rating of 2A (12V) and maximum length of 2m.
1
12V
B_
B_
13) SATA3 0/1/2/3/4/5/6/7 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel
RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring
a RAID array.
_
S _S
_
S _S
_
_
Connect your RGB (RGBW) LED strip to the header. The power pin
(marked with a triangle on the plug) of the LED strip must be connected
RGBW RGB
to Pin 1 (12V) of this header. Incorrect connection may lead to the
LED Strip LED Strip
damage of the LED strip.
1
12V
For how to turn on/off the lights of the LED strip, refer to the instructions in Chapter 5, "Unique
USB 0_ B
Features," "APP Center\RGB Fusion."
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
USB 0_ B
To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Peripherals\SATA
And RST Configuration," for more information.
_
LED_C2
1
LED_C1
1
F_USB3
B_
F_USB3
B_
7 5 3 1
6 4 2 0
SATA3
7
7
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
- 31 -
_B _
Pin No. Definition
1 12V
2 G
3 R
4 B
5 W
Chipset supports RAID 0,
®
1
1
Hardware Installation