Other Features; Set The Alarm Timer; Set The Sleep Timer; Play From An External Device - Philips BTM2056/96 User Manual

6 Other features

Set the alarm timer

This system can be used as an alarm timer.
You can select CD, FM tuner, or USB as alarm
source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER
until [SET TIMER] (set timer) scrolls on the
display.
» [SELECT SOURCE] (select source) is
displayed.
2
Press SOURCE repeatedly or the source
selection buttons on the remote control to
select a source: disc, FM tuner, or USB.
3
Press TIMER to confirm.
» The hour digits blink.
4
Press or
5
Press TIMER to confirm.
» The minute digits blink.
6
Repeat steps 4-5 to set the minute and
alarm volume.
Tip
•
If the system is idle for 90 seconds, it exits alarm setting
mode automatically.
To activate or deactivate the alarm timer:
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
appears when the alarm timer is activated.
»
Tip
•
If CD or USB is selected as alarm source, yet there
is no disc inserted or no USB connected, the system
switches to the tuner source automatically.
13 EN
to set the hour.

Set the sleep timer

Note
•
Make sure that you have set the clock correctly.
When the system is turned on, press SLEEP
repeatedly to select the sleep timer period
(in minutes).
» If the sleep timer is activated,
To deactivate the sleep timer:
Press SLEEP repeatedly until [OFF] (off) is
displayed.

Play from an external device

You can also listen to an external audio device
through this system.
1
Connect the audio cable (not supplied) to:
• the MP3 LINK socket (3.5mm) on the
system.
• the headphone socket on an external
device.
MP3 LINK
2
Press MP3 LINK to select the MP3 link
source.
is displayed.