Setting The Projector Id - Epson PowerLite EB-L200X User Manual

Setting the Remote Control ID
Parent topic:

Setting the Projector ID

If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Installation menu and press
3. Select Projector ID and press
4. Press the arrow buttons on the remote control to select the identification number you want to use for
the projector. Then press
Repeat these steps for all the other projectors you want to operate from one remote control.
Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button
to temporarily display the projector's ID on the screen.
Parent topic:
Using Multiple Projectors
Enter.
Enter.
Projector Identification System for Multiple Projector Control
Enter.
142