Epson PowerLite EB-L200X User Manual page 125

4. Select Light Source Brightness Control and press
5. If you want to maintain the brightness at a specific level, select the Maintain Brightness setting and
select On.
6. If you turn on Maintain Brightness, select the Maintain Brightness Level setting and check the
Estimated Remains information.
7. If you turn off Maintain Brightness, select the Light Source Mode setting:
• Normal: Sets brightness to the maximum level (ideal for conference rooms, auditoriums, and
lecture halls)
• Quiet: Sets brightness to 70% and reduces fan noise (ideal for libraries, theaters, museums, and
art galleries)
• Extended: Sets brightness to 70% and extends the life expectancy of the light source (ideal for
darker environments with ambient light, such as museums and art galleries, where a reduced
maintenance cycle is desired)
• Custom: Allows you to select a custom brightness level between 70 to 100%
8. If you set the Light Source Mode setting to Custom, select Brightness Level and use the left and
right arrow buttons to select the brightness.
9. Press Menu or Esc to exit the menus.
Note: For the best results in maintaining the brightness level, set the Light Source Calibration
setting to Run Periodically in the projector's Management menu.
Constant Brightness Usage Hours
Parent topic: Using Basic Projector Features
Enter.
125