Table of Contents
Advertisement
2.1 Central Processing Unit (CPU)
The mainboard includes an onboard Intel® SOC, and a cooler has been installed to provide
sufficient cooling.
2.2 Connect Cooling Fans
These fan headers support cooling-fans built in the computer. The fan cable and connector
may be different according to the fan manufacturer. Connect the fan cable to the connector
while matching the black wire to pin#1.
CPU_FAN1: CPU fan header
SYS_FAN1: System fan header
Note
» » Thease fan headers support 3-pin head connectors. When connecting with wires onto connectors,
please note that the red wire is the positive and should be connected to pin#2, and the black wire is
Ground and should be connected to GND.
2.3 Installing System Memory (1.35V only)
DIMMA1: DDR3L Memory Module (204 pin SO-DIMM)
Note
» » If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Chapter 2: Hardware installation
BIMX-100/BIMX-200 User's Manual
CPU_FAN1
Pin Assignment
1
Ground
2
+12V
3
FAN RPM rate sense
4
Smart Fan Control
SYS_FAN1
Pin Assignment
1
Ground
2
+12V
3
FAN RPM rate sense
Chapter 2: Hardware installation | 7
Advertisement
Table of Contents
