Speaker Angle And Non Skid Pad; Specifications - Yamaha YST-MS35D Owner's Manual

Speaker angle and Non skid pad

You can adjust the speaker angle. Loosen the
screw on the bottom of the speaker stand as
shown in the figure, adjust the angle of the
stand, and tighten the screw to fix the stand.
To prevent the speakers from sliding around,
attach the supplied pads to the four points on the
bottom of each satellite speaker. Place the
speaker on a stable, flat surface.
Specifications
Type
Driver
Output power
Input sensitivity
Input impedance
Frequency response
Crossover Frequency
Input jack
Power supply
(AC adaptor)
Dimensions (W H D) Satellite speakers......................65 (2.6") 75 (3") 119 (4.7") mm
Weight
Accessories
* Specifications subject to change without notice.
Please contact an authorized Yamaha dealer for more information on this product or connections to your computer.
10
E-
Advanced Yamaha Active Servo Technology
Satellite ....................................5 cm (2") cone, magnetic shielding
Subwoofer ................................12 cm (5") cone, magnetic shielding
Satellite ....................................6 W + 6 W (1 kHz, 4 at T.H.D.=10%)
Subwoofer ................................18 W (100 Hz, 4 at T.H.D.=10%)
200 mV (1 kHz, 4 at 6 W)
20 k
45 Hz to 20 kHz (Satellite + Subwoofer)
Satellite/Subwoofer 180 Hz
3.5 mm stereo mini jack for audio-signal 2
USB digital 1
U.S.A. and Canada models ......AC 120 V, 60 Hz
Australia model........................AC 240 V, 50 Hz
U.K. and Europe models..........AC 230 V, 50 Hz
Subwoofer ................................183 (7.2") 196 (7.7") 183 (7.2") mm
Satellite speakers......................Right: 0.45 kg (1 lb.), Left: 0.36 kg (13 oz.)
Subwoofer ................................2.3 kg (5 lbs. 1 oz.)
AC adaptor (PA-M30) 1
3.5 mm stereo mini plug cable 1 (1.8 m)
USB cable 1 (2 m)
8 pcs of non skid pads 1 set
Loosen Tighten
Speaker stand
*
* Non skid
*
pad