Model Description; Attaching A Speaker To A Speaker Stand; Attaching Non-Skid Pads - Yamaha STAGEPAS 600BT Owner's Manual

Model description

There are two models of Bluetooth-enabled STAGEPAS. The following table describes
the differences in mixer functions between these models.
Model name Line-in channels
STAGEPAS 600BT CH 5/6, CH7/8, CH9/10
STAGEPAS 400BT CH 5/6, CH7/8
NOTE
This manual primarily uses the STAGEPAS 600BT for purposes of explanation.

Attaching a speaker to a speaker stand

1.
2.
Equalizer
HIGH, MID, LOW
HIGH, LOW

Attaching non-skid pads

If you plan to lay the speaker flat on its side, attach the included non-skid pads in the
locations indicated by arrows in the figure below.
Attach the speaker to the speaker stand with the lock lever moved up (release
position).
Move the lock lever down to lock to the stand.
1.
Release
2.
Lock
STAGEPAS 600BT/STAGEPAS 400BT Owner's Manual
Model description
Lock lever
7