Miele FashionMaster B 3847 Operating Instructions Manual page 70

Frequently asked questions
Problem
The temperature of the
iron is always high.
The cover of the ironing
board is damp.
Water is leaking from
the steam ironing sys-
tem at the height of the
water container when it
is being moved.
The fan on the ironing
board is not running.
70
Possible cause and solution
There is a fault.
 Contact Miele.
There is a fault.
 Remove the ironing board cover and allow it to
dry.
 Put the dry ironing board cover back on (see
"Cleaning or replacing the ironing board cover").
If the ironing cover gets damp again, contact Miele
Service.
The frequent removal and replacement of the water
container may cause water droplets to collect in the
area under the water container.
 Use a cloth to dry the area underneath the water
container.
Steam was not used.
 The fan only runs when the steam function on the
iron is activated.
The steam is not ready yet.
 Wait until the message 
dicate that steam is ready.
The water container is empty or missing.
 Fill the water container with fresh tap water and in-
sert it into the appliance.
The steamer is connected.
 The fan only runs when the iron is connected.
Connect the iron.
There is a fault.
 Contact Miele Service.
is displayed to in-
Ready