Yamaha P-150 Owner's Manual page 33

ENTERING AND EXITING SPLIT MODE
Press the [SPLIT] button.
When you press the [SPLIT] button, the LED above it will light, and the keyboard
will split into two areas, one playing the main voice you selected in Single or Dual
mode, and the other playing the voice which was last selected as the Split mode
sub voice. (ELECTRIC BASS is the default sub voice designated at the factory.)
The current split point designation and keyboard area assignments briefly
appear in the screen.
SPLIT POINT=C 2
KBD AREA=Sub/Man
The first line of the above screen indicates that the current split point area is
designated at key C2 (the initial default setting). The second line indicates
that the sub voice is assigned to the left side of the split point, while the main
voice is assigned to the right side of the split point.
After a few moments, the names of two voices will appear in the LCD screen.
The P-150 will now play the two voices using the current split point
designation and keyboard area assignments.
Split Point (included in main area)
Sub Voice
To exit Split mode, simply press the [SPLIT] button again. The P-150 will
return to Single or Dual mode, depending on which one was active before
you entered Split mode, playing the voice you have selected as the main
voice.
SPLIT
BALANCE
Current split point
Left side Right side
[VOICE]
Bass / Piano1
Sub Voice Main Voice
(C2) Main Voice
29
If you enter Split mode directly from
Dual mode, and then choose the
Organ 1 voice as the main voice,
when you press the [SPLIT] button to
exit Split mode, the P-150 will
automatically switch to Single mode.
In Split mode, the [PITCH] and
[MODULATION] wheels, as well as
the sustain, soft and sostenuto
pedals, will only affect the main voice.