Table of Contents
Advertisement
encapsulation, click "Next" enter to the protocol configure. Below, we introduce the configuraion of the
five protocol modes.
• PPP over ATM (PPPoA)
• MAC Encapsulated Routing (MER)
• Bridging
Some connection lines need to confirm the LLC or VC, if you can't confirm, please don't modify the
default value or ask your ISP.
3.4.2 RFC1483 BRIDGE CONFIGURATION
Select the Bridging mode. Then press "Next" to specify the Service Name, and select the "Enable Service" as
Figure 3.5.
Press "Next" to enter into "WAN configuration", click "save" to save configuration, if you need to modify
the parameter, click "back" as Figure 3.6.
• PPP over Ethernet (PPPoE)
• IP over ATM (IPoA)
Figure 3.5
Page 9
User Manual
Total 20 Pages
Advertisement
Table of Contents
