Other Configuration; Lan Configuration; Configuration Of Modem's Ip Address; Dhcp Configuration - DareGlobal DB120-WG User Manual

Table of Contents

Advertisement

4 OTHER CONFIGURATION

4.1 LAN CONFIGURATION

Configuration of Modem's IP address and password

4.1.1 CONFIGURATION OF MODEM'S IP ADDRESS

As a network device, ADSL Modem has its own IP address and MAC address. The factory sets the
MODEM, at a default IP address of 192.168.1.1 and subnet mask of 255.255.255.0. The user can configure
these addresses through the "LAN" on "Configuration" like this:
For example, change IP address to "10.10.10.10". Click "LAN", input "IP address": 10.10.10.10, then
"subnet mask": 255.0.0.0, the result is as Figure4.1, press "save".
Note
If you change IP address, it will take effect after you reboot the modem. You must use the new IP
address to login.

4.1.2 DHCP CONFIGURATION

• click"LAN "
• click"DHCP server" ;
• Define the "Start IP address" and the "End IP address" of DHCP server (for example, from
10.10.10.11 to 10.10.10.254).
• Input the value of lease (Measured by the second, 0 indicates permanently valid).
Figure 4.1
Page 16
User Manual
Total 20 Pages

Advertisement

Table of Contents
loading

This manual is also suitable for:

Db120-wl

Table of Contents