Table of Contents
Advertisement
2 SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
ITEM
Name
POWER
DSL
Indicator
INTERNET
WLAN
LINE
ETHERNET
Interface
SWITCH
POWER
RST
2.1.2 SPLITTER SPEC
Table 2.1
A steady red light means the power connection works properly
Yellow, shows DSL line status.
Green, Flashing means the Modem is transmitting or receiving data
Green, Indicates status of connection to the wireless device
Connected with phone line or "ADSL" port of the splitter.
To be connected to a PC network card by a straight-through network cable, also
can use a crossover cable to connect to Hub, Switch or Router.
Power interface, Connect with power adapter.
To turn on / off the power.
Press the reset button and turn on the power, then keep pressing the reset button for
5 seconds. Then you can reset the modem with the default settings.
Table 2.2
Interface
Introduction
LINE
Connected with telephone line
Connect with the LINE port of the
ADSL
ADSL Modem using telephone
line provided.
PHONE
Connect with telephone
Page 4
State introduction
User Manual
Total 20 Pages
Advertisement
Table of Contents
