Octave - Yamaha PortaTone EZ-30 Owner's Manual

Octave

If the notes in a Flash song are outside the EZ-30's key range (C1–C6), You can change their
pitch in octave steps so that you can use the Lesson function. If the
appears in the lower-left of the display during playback of flash songs, follow the procedure:
Stop the song, and press the right Overall button to select
"OCTAVE".
Press the [+]/[–] buttons to set the desired Octave value (–2
– +2) until the
• You can instantly restore the default setting of "0" by pressing both [+]/[–] but-
• You can set the Octave function only for the Flash songs.
Selecting a right/left-hand guide track
You can select a track that guides your right and left hand fingering during the Les-
son (See page 34). This function is available only when you select a flash memory
song (SMF format 0).
1. While the song is
stopped, press and hold
down the LESSON [R] or
[L] button to select the
desired part.
A frame appears around the number of the GUIDE track.
2. Press the numeric keypad or [+]/[–]
buttons to select a lesson track
number.
indicator disappear.
tons simultaneously (when Octave is selected).
Current Octave value
indicator
73