Available Midi Funcitons - Yamaha PortaTone EZ-30 Owner's Manual

MIDI Terminals
In order to exchange MIDI data between multiple devices, each device must be con-
nected by a cable.
The MIDI terminals of the EZ-30 are located on the rear panel.
• MIDI IN....................Receives MIDI data from another
• MIDI OUT ................Transmits the EZ-30's keyboard infor-
MIDI LSB receive cancel
To set the EZ-30 so that it will not receive LSB data for Bank Select, press the
[STANDBY/ON] switch to turn on the power to the EZ-30 while holding down the
lowest key (C1).
To cancel this setting, turn on the power to the EZ-30 again in the normal manner.
Available MIDI Functions
The EZ-30 has MIDI IN/OUT terminals on the rear panel.
Using the MIDI functions can expand your possibilities for creating and playing music.
Playing on a MIDI keyboard (without an internal tone generator) can produce sound
on the EZ-30.
EZ-30
You can record performance data created on the EZ-30 (performance using the key-
board and auto accompaniment: 1–16 channels) to an external sequencer (such as
sequence software on a computer). You can then edit the performance data on the
external sequencer and play it again on the EZ-30.
EZ-30
Initial send (See page 81.)
MIDI device.
mation as MIDI data to another MIDI
device.
MIDI reception
MIDI IN MIDI OUT
MIDI transmission
MIDI OUT
MIDI IN
MIDI reception (playback)
(without an internal tone generator)
MIDI Keyboard
Editing and arranging
after recording
MIDI IN
MIDI OUT
Personal Computer,
Sequencer
77