Troubleshooting - Beko DIT39432 User Manual

11. TROUBLESHOOTING

Machine does not start.
•
Power cable is unplugged. >>> Check if the power cable is plugged in.
•
Cicuit Breaker is blown. >>> Check the Cicuit Breaker in your house.
•
Water is cut. >>> Make sure that the water inlet tap is open.
•
Door of the machine is open. >>> Make sure that you have closed the door of the
machine.
•
On / Off button is not pressed. >>> Make sure that you have turned on the machine
by pressing the On / Off button.
Dishes are not washed clean
•
Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
•
Selected program is unsuitable. >>> Select a program with a higher temperature and
cycle time.
•
Wash arms are stuck. >>> Prior to starting the program, turn the lower and upper
Wash arms by hand to make sure that they rotate freely.
•
Wash arms holes are clogged. >>> Lower and upper Wash arms holes might be
clogged with small food particles and debris. Clean the Wash arms regularly as
illustrated in section "Cleaning and Care".
•
Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section "Cleaning and Care".
•
Filters are installed incorrectly. >>> Check the filter system and make sure that it is
installed correctly.
•
Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
•
Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet
detergents.
•
Detergent is not sufficient. >>> If you are using powder detergent, adjust the
amount of detergent according to the soiling degree of your dishes and/or program
definitions. We recommend you to use tablet detergents for optimum results.
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
•
Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is
closed tightly after adding detergent.
Dishes are not dry at the end of cycle
•
Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no
water will accumulate in them.
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
41
USA