Important Safety Instructions - Beko DIT39432 User Manual

INTRODUCTION
Please read this user manual and
particularly the safety instructions
completely and carefully. They will save
you time and effort and help to ensure
optimum dishwasher performance.
Be sure to observe all listed warnings
and cautions. Look particularly for the
icons with exclamation marks inside. The
information icon will also provide important
references.
A
WARNING: Indicates a
potentially hazardous situation
which, if not avoided, could
result in death or serious injury.
A
CAUTION: Indicates a
potentially hazardous situation
which, if not avoided, may result
in injury. It may also be used to
alert against unsafe practices.
C
NOTICE: Indicates a
potentially hazardous situation
which, if not avoided, may result
in damage to the dishwasher,
the table-ware, the equipment
or the environment.
1. IMPORTANT SAFETY
INSTRUCTIONS
A
WARNING:When using
the dishwasher, follow basic
precautions, including the
following:
Read all instructions before
using the dishwasher! Save
these operating instructions
and pass them on to any future
user.
A
"This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions:
(1) this device may not cause
harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation."
"No changes shall be made to
the equipment without the
manufacturer's permission
as this may void the user's
authority to operate the
equipment"
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
1
USA