Changing The Split Voice Split Point - Yamaha DRX-730BL Owner's Manual

Changing the SPLIT VOICE Split Point

The SPLIT VOICE split point can be set to any key on the PSR-730/630 keyboard
to match your individual playing requirements.
1
Select the SPLIT VOICE Split Point Function
Use the MENU [ ] and [ ] buttons to the left of the display to move the triangular
indicator next to "OVERALL" on the left side of the display.
Then use the SUB MENU [ ] and [ ] buttons to select the "Split Point" function
from within the OVERALL menu . The MIDI note number (see the bottom of the
keyboard) corresponding to the current split point will appear to the right of "Split
Point" on the top line of the display.
S p l i t P o i
2
Set As Required
Simply press the key you want to assign as the split point. The key number of the
key you press will appear to the right of "SplitPoint" on the top line of the display. You
can also use the [–] and [+] buttons, number buttons, or data dial to enter the split point
key number. The lowest key on the keyboard (C1) is key number "36", middle C (C3)
is "60", and the highest key (C5) is 96. The split point can be set at any key number
from 0 through 127, allowing the split point to be set outside the range of the PSR-730/
630 keyboard for MIDI applications.
MENU
MIDI
DIGITAL EFFECT
OVERALL
GROOVE&DYNAMICS
n t : 5 9 [ B 2 ]
Playing the PSR-730/630
1 2 3
4 5 6
7 8 9
+
– / NO 0 / YES
• The split point key be-
comes the highest
key in the left-hand
section of the key-
board.
• The default split point
(54 for PSR-730 and
59 for PSR-630) can
be instantly recalled
by pressing the [–]
and [+] buttons at the
same time.
• For the relationship
between the SPLIT
VOICE split point and
the AUTO ACCOM-
PANIMENT split
point, see page 31.
• When setting the split
point, that is, the sub
menu "SplitPoint" is
shown on the display,
pressing the key on
the keyboard doesn't
either produce notes
or detect chords in the
accompaniment sec-
tion, but only desig-
nates the split point.
21