Clock; Initial Data Send - Yamaha DRX-730BL Owner's Manual

MIDI Functions

Clock

Reception of an external MIDI clock signal can be enabled or disabled as required.
When disabled ("Off"), all of the time-based functions (Auto Accompaniment, SONG
recording and playback, etc.) are controlled by its own internal clock. When MIDI
clock reception is enabled ("On"), however, all timing is controlled by an external
MIDI clock signal received via the MIDI IN terminal (in this case the PSR-730/630
TEMPO setting has no effect). The default setting is "Off".
E x t . C l o c

Initial Data Send

Transmits all current panel settings to a second PSR-730/630 or a MIDI data storage
device. To send the initial data select the "Init.Send Sure?". Then press the [+] (YES)
to begin transmission of the initial data.
I n i t . S e n
If you want to have the song play back with the panel settings used for recording,
execute the Initial Data Send function before recording the performance on the PSR-
730/630 to an external sequencer.
128
k : O f f n d P i a n o
d S u r e ? n d P i
• External Clock is "Off"
• When External Clock
• When External Clock
• During Style/Song/
Y E S
be default when the
power is initially turnd
on.
is turned "On", AUTO
ACCOMPANIMENT
playback cannot be
started via the panel
[START/STOP] but-
ton, or started via the
synchro start function.
Also, the MULTI PAD
playback cannot be
initiated by pressing
the MULT PADs.
is turned "On", "EC"
will appear on the
TEMPO display, and
tempo cannot be
changed with the
panel button.
Multi Pad playback, in
the synchro start
mode and in one of
the Record modes,
the display shows
"Init.Send Sure? - - -"
indicating that you
cannot execute the
initial data send op-
eration.