Yamaha DRX-730BL Owner's Manual page 109

2
Select the MULTI PAD Record Mode
Press any MULTI PAD button ([1] ... [4]) to select the MULTI PAD record mode
(the MULTI PAD button you press will be selected for recording). The MULTI PAD
menu will automatically be selected and a user pad set number will appear on the top
line of the display. The beat indicator dots will flash at the currently set tempo,
indicating that the record ready (synchro-start) mode is engaged.
STOP
B a n k 3 7 :
MENU
007
DISK
MULTI PAD
STYLE
SONG
REGIST MEMORY
3
If Necessary, Select a User Pad Set Number
If the desired user pad set is not already selected, use the [–] and [+] buttons, [1]–
[0] number buttons, or the Data Dial to select as required.
4
If Necessary, Select a MULTI PAD to Record
If the MULTI PAD you pressed in step 2, above, is not the one you want to record,
you can select any other pad at this point simply pressing the appropriate MULTI PAD
button. The selected MULTI PAD icon will appear in the display.
1
5
Specify Chord Match if Required
If you record a MULTI PAD with a pitched voice, the Chord Match function (see
page 63) can be specified for that pad by using the SUB MENU buttons to select the
Chord Match function for the corresponding pad ("P1ChdMatch" ... "P4ChdMatch")
while in the record standby or rehearsal mode, and then using the [+] button to turn
it "On" or "Off" as you like.
P 1 C h d M a t
1 2
116
A B
ONE TOUCH
100
SETTING
TEMPO REPEAT
000
1 2 3 4
DISK ACMP/SONG
TRANSPOSE VOLUME REGISTRATION MEMORY
2 3
c h : O n
MULTI PAD
3 4
U s e r P a d 1
001
001
MEASURE BEAT
VOICE
FREEZE
1 2 3 4
MULTI PAD
MULTI PAD
4
BEAT
1 2 3
MULTI PAD
e g g i o
Multi Pad Recording
• If the [RECORD] but-
ton is pressed while a
preset pad set is se-
lected, the lowest-
numbered user pad
set which does not
contain any recorded
data will automatically
be selected. If other
user pad sets already
contain data, how-
ever, user pad num-
ber 1 will be selected.
• The DSP effect can-
not be turned on dur-
ing MULTI PAD re-
cording or the MULTI
PAD record standby
mode. If the DSP ef-
fect is on when the
MULTI PAD record
mode is engaged, it
will automatically be
turned off.
• If the Metronome
function is on (page
116), the metronome
will sound at the cur-
rent tempo.
4
• The Chord Match on/
off status can be
changed in the SUB
MENU "MULTI PAD"
even after exiting the
recording mode.
107