Alfa Network AC1200 User Manual page 27


Clone MAC Address - Fill in the MAC address for the MAC address to be cloned

Enable uPNP - Click the checkbox to enable uPNP function.

Enable IGMP Proxy - Click the checkbox to enable IGMP proxy

Enable Ping Access on WAN - Click the checkbox to enable WAN IGMP response.

Enable Web server Access on WAN - Click the checkbox to enable web configuration from

Enable IPsec pass through on VPN connection - Click the checkbox to enable IPSec
packet pass through

Enable PPTP pass through on VPN connection - Click the checkbox to enable PPTP
packet pass through

Enable L2TP pass through on VPN connection - Click the checkbox to enable L2TP packet
pass through
1. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting,
select Static IP. The Static IP settings page will appear, shown in Figure 4-
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP,

usually 255.255.255.0.
Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation

provided by your ISP.
 MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU Size
unless required by your ISP.
DNS 1 / DNS 2 / DNS 3 - (Optional) Enter one or two DNS addresses in dotted-decimal

notation provided by your ISP.
Click the Apply Changes button to save your settings.
2. If your ISP provides the DHCP service, please choose DHCP Client type, and the Router will
automatically get IP parameters from your ISP (shown in Figure 4-
- 22 -
AC1200R User's Guide
.
7
).
8