Alfa Network AC1200 User Manual page 21

it's not necessary to change this value unless you know what will happen after
modification.
 Associated Clients: Click the "Show Active Clients" button to show the status table of
active wireless clients.

Enable Universal Repeater Mode: Universal Repeater is a technology used to extend
wireless coverage. To enable Universal Repeater Mode, check the box and enter the
SSID you want to broadcast in the field below. Then please click "Security" submenu
for the related settings of the AP you want to connect to.
10. Set your security preference then click the Finished button.
Wireless Security: Recommend to choose WPA-PSK/WPA2-PSK and enter a Security Key
using ASCII characters between 8 and 63 characters or 64 hexadecimal characters in the
PSK Password filed. For advanced settings, please refer to
WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase.

PSK Password - You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers from 0 to 9 and any letters from
A to Z, the length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please note the key is case sensitive, therefore the upper and lower case keys will
affect the outcome. It is highly recommended to write down the key and all related
wireless security settings.
Figure 3-12 Quick Setup - Finish
- 16 -
AC1200R User's Guide
Section 4.6: "Wireless".