Adding The Unit To The Musiccast Network - Yamaha Aventage RX-A2A User Manual

Table of Contents

PREPARATIONS > Setting MusicCast

Adding the unit to the MusicCast network

Perform the following procedure to add the unit to the MusicCast network. You can also configure the unit's

wireless network settings at once.

Launch the "MusicCast CONTROLLER" application on your mobile device and tap

Operate the "MusicCast CONTROLLER" application following the on-screen

instructions.

If you configure the unit's wireless network settings with this method, the SSID and security key for your wireless LAN router

(access point) will be needed.

If you add the second or later MusicCast compatible device, tap "Settings" and then "Add New Device" in the "MusicCast

CONTROLLER" application.

When you add the unit to the MusicCast network, the wireless LAN indicator sometimes lights up on the front display even if a

wired connection is used.