Table of Contents
Advertisement
ENJOYING IN MULTIPLE ROOMS (ZONES) > Operating zones
Basic procedure in zone
Basic procedure for playback in zone is as follows. The zone selected by the zone switch can be operated.
1
Turn on the zone.
2
Turn on the external devices connected to the unit.
3
Use the input selection keys to select an input source.
4
Start playback on the external device or select a radio station.
5
Press VOLUME to adjust the volume.
NOTICE
To avoid unexpected noise, never play back DTS-CDs in Zone2.
(
NOTE
You cannot select Bluetooth, USB and network sources exclusively for each zone. For example, if you select "SERVER" for Zone2
(
when "USB" is selected for the Main zone, the input source for the Main zone also switches to "SERVER".
The zone input automatically switches in conjunction with the input source selected in the Main zone when "Main Zone Sync" is
(
selected as the zone input.
To adjust the zone volume, press VOLUME or MUTE when using the unit's internal amplifier.
(
Refer to the instruction manual for the external device.
(
Related links
"Turning on/off the power of zones" (p.154)
(
"Other procedure in zone" (p.156)
(
155
Advertisement
Table of Contents
