Yamaha Aventage RX-A2A User Manual page 262

CONFIGURATIONS > Configuring various functions (Setup menu)
Setting the amount of time for the auto-standby function
Sets the amount of time for setting the unit to standby mode automatically.
Setup menu
"Function" > "ECO" > "Auto Power Standby"
Settings
Off
5 minutes, 20 minutes
2 hours, 4 hours,
8 hours, 12 hours
NOTE
Just before the unit enters standby mode, the number of seconds to standby mode counts down on the front display.
(
When "Dimmer" is set to "-5" (turned off), it is incomprehensible that the power of the unit is set to on. If you set "Auto Power
(
Standby" to "Off", pay attention to forget to turn off the unit.
Related links
"Basic operation of the Setup menu" (p.179)
Does not set the unit to standby mode.
Sets the unit to standby mode when you have not operated the unit and the unit has not
detected any input signal for the specified time.
Sets the unit to standby mode when you have not operated the unit for the specified time.
262