Adjusting The Brightness Of The Front Display - Yamaha Aventage RX-A2A User Manual

CONFIGURATIONS > Configuring the unit's settings by operation of the body front panel (Front Display menu)

Adjusting the brightness of the front display

Adjusts the brightness of the following on the front panel. Higher value brightens the front display.
Front display
(
Indicators (ZONE, PURE DIRECT)
(
Setup menu
"Function" > "User Interface" > "Display Settings" > "Dimmer"
Front Display menu
"Dimmer"
Setting range
-5 to 0
NOTE
The front display is turned off by "-5". The default setting is "-2".
(
If you set "Dimmer" to "-5", the front display will be turned off after closing the menu.
(
Though you set "Dimmer" to "-5", short message and menu on the front display will be displayed in brightness "-4".
(
If you set "Dimmer" to "-5", it is incomprehensible that the power of the unit is set to on. Pay attention to forget to turn off the unit.
(
We recommend setting "Auto Power Standby" in the "Setup" menu to besides "Off".
The setting brightness may become dark when "ECO Mode" is set to "On".
(
The setting of "Dimmer" in the "Setup" menu is interlocked with the setting of "Dimmer" in the "Front Display" menu.
(
You can set "Dimmer" using the color keys on the remote control when "Remote Color Key" in the "Setup" menu is set to "Display
(
Control".
Related links
"Setting the functions for the color keys on the remote control" (p.260)
(
"Setting the amount of time for the auto-standby function" (p.262)
(
"Setting the use of the eco mode" (p.263)
(
"Basic operation of the Setup menu" (p.179)
(
"Basic operation of the Front Display menu" (p.283)
(
285