Listening To The Radio - Yamaha Aventage RX-A2A User Manual

PLAYBACK > Listening to the radio

Listening to the radio

You can tune in to a radio station by using the unit's built-in tuner.
1
Select "TUNER" as the input source.
"TUNER" is selected as the input source and the frequency currently selected is displayed on
the front display.
"TUNED" lights up on the front display when the unit is receiving a radio station signal.
"STEREO" lights up on the front display when the unit is receiving a stereo radio signal.
2
Press BAND to select the following band.
FM/AM (Except for U.K., Europe, Russia and Australia models)
(
DAB/FM (U.K., Europe, Russia and Australia models)
(
3
Select a radio station.
Press TUNING repeatedly to select a frequency for reception.
(
Hold down TUNING for about a second to search stations automatically.
Press PRESET to select a registered radio station.
(
NOTE
To switch between stereo and monaural for FM radio reception, press MODE. When the signal reception for an FM radio station is
(
unstable, switching to monaural may improve it. Even when you switch to stereo, "STEREO" does not light up on the front display if
the unit is not receiving a stereo radio signal.
You can watch videos input from external devices while listening to radio.
(
You can check reception strength of each DAB channel label.
(
Related links
"Registering a radio station manually" (p.132)
(
"Selecting a video source to be displayed with the selected audio source" (p.172)
(
129