Sensor Cook - Galanz ExpressWave GSWWD14S2S11 Manual

OPERATION INSTRUCTIONS

Sensor Cook

For sensor cook function, you can select the type of food you
want to cook from the programs listed on the cooking label
located on the interior panel of the appliance.
Auto Program: How to Cook 8 oz fish with
sensor.
1
In standby mode, press the SENSOR
COOK once.
2
Turn the dial to select food code 'SC-2'
(Fish).
3
Press the dial once to confirm and start
sensing and cooking.
15
4
The appliance will start countdown after
detecting the moisture. Before
countdown, the food code will display.
Sensor Cook Food Chart (Auto Program)：
Food Code Weight Range
Corn on the Cob SC-1 8-24 oz
Fish SC-2 7-21 oz
Fresh Vegetable SC-3 7-21 oz
Ground Meat SC-4 5-24 oz
Oatmeal SC-5
5-16 oz
Rice SC-6 5-16 oz
NOTE:
After cooking for a period of time, the system will detect
whether there is error, if there is error, for example, the sensor
short circuit or open circuit, the system will stop automatically
with the display showing "Er60", beeps sound until press
STOP/CANCEL pad.
If there is no error, the system will judge corresponding cooking
time based on the steam generated by the food, after cooking
for a period of time, the countdown will display on the screen.
During sensor cooking program, if press STOP/CANCEL pad
once or open the door, the system will turn back to standby
mode.
If during the longest sensor time the oven cannot judge the
cooking time according the steam produced by food in the
cavity, the cooking will auto-end.