Operation Instructions; Setting The Clock - Galanz ExpressWave GSWWD14S2S11 Manual

OPERATION INSTRUCTIONS

Setting the Clock

You can set the clock in 12-hour or 24-hour by pressing
CLOCK/TIMER in standby mode.
Example: How to set a 12-hour clock at 11:58.
1
In standby mode, press and hold
CLOCK/TIMER for 3 seconds to
select 12-hour clock (press the pad
again to select 24-hour clock).
2
Turn the dial until the correct hour is
displayed.
3
Press the dial or CLOCK/ TIMER
to confirm the hour.
or
9
4
Turn the dial until the correct minute is
displayed.
5
Press the dial or CLOCK/ TIMER to
confirm the minute and finish setting.
or
NOTE: While in the process of setting the clock, you can cancel
the settings by pressing the STOP/CANCEL.