Table of Contents
Advertisement
Chapter 3 — Configure the SF61B Cordless Scanner
Online Setup Via the SD62 Base Station
Offline Setup with EasySet
56
To disconnect your scanner from EasySet
1 Select Disconnect from the Communication menu in Easyset.
HID connection: the scanner disconnects from EasySet and
restarts, and then goes into "ready to work" mode (the blue
Intermec Ready-to-Work indicator comes on) as it is still
connected to the host PC.
Host-initiated Outgoing SPP connection: the scanner
disconnects from EasySet and restarts but it is no longer
connected to the host PC.
You can also setup you scanner via the SD62 base station using the
SD62 System command file in EasySet. See the SD62 Base Station User's
Guide for more information.
To configure your scanner offline by scanning bar codes
1 Start EasySet. The first time you start EasySet, the Select product
dialog box appears.
If the Select product dialog box does not appear, choose Product
> Select or click on the product icon in the upper left corner of the
EasySet window.
2 Select your product.
3 Open the folders in the EasySet commands window to find the
configuration commands you need and double-click each
command to send it to the setup sheet.
4 Click on the Print icon to print out the setup sheet and then scan
the commands with your SF61B cordless scanner.
SF61 Cordless Scanner User's Guide
Advertisement
Table of Contents
