Abus FUBW50022 User Manual page 32

Note on the perimeter warning (Secvest)
Use the "perimeter warning" as the zone type – for more details refer to the instructions for
the "Secvest" alarm panel.
Configuration
You can set several configurations on the detector – see the programming table. The
default settings are shaded. Changes can be easily made. To restore the default settings,
switch off the power supply to the detector; then hold down the program button [Fig. 9] and
connect the power supply again (insert battery).
Programming table
Options 1
2
*PULSE COUNTER
Number of events which both sensors must detect before an output occurs.
Range in m
Pulse counter*
10 20 30
1 2
32