Table of Contents
Advertisement
Port-based Qos
This is hardware port-based QoS control method. It will limit the packets
throughput in LAN1~4, WAN port.
Enable Port-based QoS: Check this to enable port-based QoS functionality for
the LAN/WAN port. You can also uncheck to disable.
Priority: High or Low priority level of the transmit packets.
Ingress Rate: The throughput limit of receiving packets.
Egress Rate: The throughput limit of sending packets.
Application-based Qos
This is the application based QoS control method. You can reserve or limit the
bandwidth of some LAN IP address and port number. They will guarantee the
throughput in WAN connection.
62
Advertisement
Table of Contents
