Registering Camera Manually; Configuring Ip Automatically - Hanwha Techwin Wisenet TNM-3620TDY User Manual

Configuring Dynamic IP
Receive IP address from DHCP
~ Example of the Dynamic IP environment
- If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server
- If connecting the camera directly to modem using the DHCP protocols
- If IPs are assigned by the internal DHCP server via the LAN
1. Click the camera that you want to change the IP setting at
the list.
2. Click <IP Assign> at the main page of device manager.
3. Select <Obtain an IP address automatically (DHCP)>.
4. Click [Apply] button.
5. If the success message is displayed, click [OK].

REGISTERING CAMERA MANUALLY

If the camera cannot be found using search function, the camera can be registered remotely by
manually inserting IP information, if the camera is connected to external network.
1. Click <Add Devices> - <Manually Add Device> at the main
page of the device manager.
2. Insert the range of IP address that you search.
3. Select the <Model Name> of the camera that you register,
and insert HTTP port, ID, and password.
4. Click [Register] button.
5. Check if camera is registered.
~ Check its MAC address at the sticker attached to the
camera.

CONFIGURING IP AUTOMATICALLY

1. Click the camera from the list that you want to automatically
configure the IP.
2. Click < + > at the main page of the device manager.
~ Equipment Setting menu appears.
3. At the menu, click <Auto IP Configure>.
4. Click [Close] button.
TNM-3620TDY
English _15