Xerox Fax Modem 4215/MRP Operation Manual page 46

TROUBLESHOOTING
Fax Setup menu error messages
ILLEGAL NUMERIC INPUT--EXCEEDS 60
MINUTES. TO RETURN PRESS <CLEAR>.
ILLEGAL NUMERIC INPUT--EXCEEDS 10 RINGS.
TO RETURN PRESS <CLEAR>.
ILLEGAL NUMERIC INPUT--LESS THAN 1 MONTH.
TO RETURN PRESS <CLEAR>.
ILLEGAL NUMERIC INPUT--LESS THAN 1 DAY.
TO RETURN PRESS <CLEAR>.
ILLEGAL NUMERIC INPUT--LESS THAN 1
MINUTE. TO RETURN PRESS <CLEAR>.
ILLEGAL NUMERIC INPUT--LESS THAN 1 RING.
TO RETURN PRESS <CLEAR>.
INVALID WITH OUTPUT DESTINATION:
1. CONTINUE
0. EXIT TO PREVIOUS STEP
6-2
Table 6-1. Fax Setup menu error messages (continued)
Result/Reason
Redial interval entry exceeds
60.
Ring count entry exceeds 10.
Date / month entry is less than
01/1/00.
Date / Day entry is less than
1/01/00.
Redial interval entry is less
than 1.
Ring count entry is less than
1.
Tray 5 is selected as the
default input tray which
conflicts with the output
destination selection (top tray
or high-capacity stacker).
or
An input paper tray (Tray 1, 2,
3, or 4) is selected that will
not feed to the current output
destination due to the size of
the paper in the input tray.
XEROX MRP FAMILY FAX MODEM FOR MACINTOSH OPERATOR GUIDE
Action
Press the Clear/C key at the
control panel. Enter a number
between 1 and 60.
Press the Clear/C key at the
control panel. Enter a number
between 1 and 10.
Press the Clear/C key at the
control panel. Enter a number
between 1 and 12.
Press the Clear/C key at the
control panel. Enter a number
between 1 and 31.
Note: Maximum Date / Day
entry for April, June,
September, and November is
30, and for February, 28 for a
regular year or 29 for a leap
year.
Press the Clear/C key at the
control panel. Enter a number
between 1 and 60.
Press the Clear/C key at the
control panel. Enter a number
between 1 and 10.
Use Scroll keys or direct
scrolling to:
[1] continue-- invalid entry is
not changed. You can
continue to make changes to
the Fax Setup, but you must
resolve this conflict before
exiting the menu.
[0] exit to the previous step
to select another input tray
that can be fed to the current
output destination setting.