Xerox Fax Modem 4215/MRP Operation Manual page 6

NOTICES
vi
U.S. configuration of ELCI/RCD
1 Window
2 Reset button
International configuration of ELCI/RCD
1 Window
2 Reset button
If power is interrupted to the printer, follow these steps:
1. Locate the safety device, using the U.S. or International
Configuration (above).
2. Check to see if a red flag displays in the window of the
safety device.
3. If the red flag does not display, press and release the black
Reset button.
The red flag displays and power is restored to the system.
If power is not restored by this procedure or if the device
interrupts power to the printer again, call your service
representative.
XEROX MRP FAMILY FAX MODEM FOR MACINTOSH OPERATOR GUIDE