Table of Contents
Advertisement
4.
Packaged Contents
Before setting up, carefully unpack the contents onto a table or flat
surface and check that the following are complete:
Item:
Consisting of:
Fittings:
• Main unit
• AD/DC 230V power
Base
Station
Adaptor - optional use
(included)
• Main unit
• 10 meter cable -
Thermo-
• Rain protection
Hygro
optional connection to
Sensor
the base station (in-
cover
cluded)
• Wall mounting screws
• Plastic anchors for
screws
• Main unit with
• 2 x U-bolts for mast
Wind
Sensor
wind vane
holder
• 10 meter cable
• 4 x Washers
• 4 x Nuts
(already at-
• 1 x screw (to fix main
tached to the
main unit)
unit to the mast holder
• Mast holder
• Main unit (base
Rain
Sensor
and funnel)
• 10 meter cable
(already at-
tached to the
main unit)
• 2 meter PC cable for
Heavy
CD-Rom format
weather
(English,
PC connection - op-
tional use (included)
PC
German and
soft-
French lan-
ware
guages only)
GB
5.
Firstly, choose to use the adaptor (included in this set) or batteries for
operation. Both these methods allow for operation of using wireless
433MHz transmission or cable connection between the base station
Illustration:
and the sensors and setting up for both methods is as follows:
Base Station:
Battery compartment
Setting up
GB
Socket for
Adaptor
Socket for
Thermo-Hygro
Sensor
PC COM
Port
Advertisement
Table of Contents
