Maintenance And Cleaning; Defrosting; Internal Cleaning; External Cleaning - John Lewis JLUCFR6009 Instruction Manual

Maintenance and Cleaning

Before any maintenance of cleaning work is carried
out DISCONNECT the appliance from the
ELECTRICITY SUPPLY.

Defrosting

The refrigerator automatically defrosts every time the
compressor stops.The water is discharged, via the pipe, into
a tray located behind the appliance, where it evaporates.
Important
To avoid defrost water overflowing into the fridge,
periodically clean the water discharge hole in the centre
of the V shaped drip collector at the back of the
refrigerator compartment behind the salad drawer(s). Use
the special cleaner provided which you will find already
inserted into the discharge hole.
While in operation the ****-star compartment becomes
progressively covered with frost.
This frost, which acts as an insulator and thus prevents the cold
from reaching the food should be removed whenever the
thickness of the frost exceeds 6 mm (1/4").
To carry out complete defrosting proceed as follows:
1. Remove any food
compartment, wrap it in several sheets of newspaper
and store in a cool dry place.
2. Turn the thermostat knob to position << 0 >>. To
accelerate defrosting, place a bowl of hot water inside
the compartment (with a piece of cardboard underneath
the bowl as protection).
3. Remove any loose pieces of ice as soon as possible.
4. When defrosting is completed, clean and dry thoroughly.
Turn the thermostat knob to a medium position to
restart the appliance.
After letting the appliance run for at least half an hour
replace the previously removed food into the **** -star
compartment.
When defrosting it is not necessary to remove the foods
from the inner door and the refrigerator compartment.
Important
A temperature rise of the frozen food packs during
defrosting may shorten their storage life.
Never use sharp metal tools to scrape off frost from the
evaporator as you could damage it beyond repair
from inside the ****-star

Internal Cleaning

Clean the inside and accessories with warm water and
bicarbonate of soda (5 ml to 0.5 litre of water). Rinse and
dry thoroughly.
Do not use detergents, abrasive powders, highly
perfumed cleaning products, wax polishes or
cleaning products containing bleach or alcohol.
Regularly check the door seals and wipe clean to
ensure they are clean and free from debris.

External Cleaning

Wash the outer cabinet with warm soapy water.
Once or twice a year dust the condenser (black grill) and
the compressor at the back of the appliance with a brush
or vacuum cleaner, as an accumulation of dust will affect
the performance of the appliance and cause excessive
electricity consumption.

Changing the Light Bulb

Should the light fail to work you can change it as below:
Disconnect the appliance from the electricity supply.
Remove the lamp cover retaining screws, then take the
lamp cover off in the direction of the arrow and the bulb
can be changed. (Type of the bulb: 230 V, 15 W, E 14
thread)
After changing the bulb replace the lamp cover, and
retaining screws and reconnect the appliance to the
electricity supply.
When the appliance is not in
use
When the appliance is not in use for long periods
disconnect from the electricity supply, empty all of the
food and clean the appliance, leaving the door ajar to
prevent unpleasant smells.
16