Table of Contents
Advertisement
When the refrigerator is first
installed
General information
This appliance is designed for the domestic use only. It has a
four-star frozen food compartment for ice making and
frozen food storage.
Using the Appliance
Before Use
Remove all packaging and adhesive tape.
Wash the inside of the appliance with lukewarm water and
bicarbonate of soda (5 ml to 0,5 litre of water). Do not use
soap or detergent as the smell may linger. Dry the appliance
thoroughly.
perfumed cleaning products, wax polishes or products
containing alcohol.
To Start the Appliance
1. Allow the appliance to stand for 2 hrs after installation.
2. Plug in the appliance and switch on at the mains supply.
3. Turn the thermostat control to the required setting. A
setting of 3 - 4 is usually suitable for normal operation
(see thermostat control).
4. Leave the appliance for approximately 4 hours for the
correct temperature to be reached before placing food
inside.
Thermostat Control
The thermostat control situated inside the refrigerator
regulates the temperature of the larder compartment.
Thermostat control is marked from 1-5 the higher the
number, the colder the setting.
Position 0
-
Off
Position 1
-
minimum coldness
Position 5
-
maximum coldness
11
Advertisement
Table of Contents
