Table of Contents
Advertisement
10
www.aeg.com
Oven function Application
Conventional
Cooking
Bottom Heat
Defrost
Moist Fan Bak-
ing
Grill
To bake and roast food
on one shelf position.
To bake cakes with crispy
bottom and to preserve
food.
To defrost food (vegeta-
bles and fruit). The de-
frosting time depends on
the amount and size of
the frozen food.
This function is designed
to save energy during
cooking. For the cooking
instructions refer to
"Hints and tips" chapter,
Moist Fan Baking. The
oven door should be
closed during cooking so
that the function is not in-
terrupted and to ensure
that the oven operates
with the highest energy
efficiency possible. When
you use this function, the
temperature in the cavity
may differ from the set
temperature. The residu-
al heat is used. The heat-
ing power may be re-
duced. For general ener-
gy saving recommenda-
tions refer to "Energy Ef-
ficiency" chapter, Energy
Saving. This function was
used to comply with the
energy efficiency class
according to EN 60350-1.
When you use this func-
tion the lamp automati-
cally turns off after 30
seconds.
To grill flat food and to
toast bread.
Oven function Application
To roast larger meat
joints or poultry with
bones on one shelf posi-
Turbo Grilling
tion. To make gratins and
to brown.
To turn on the pyrolytic
cleaning of the oven. This
function burns off residu-
Pyrolysis
al dirt in the oven.
The lamp may turn off
automatically at a
temperature below 60 °C
during some oven functions.
6.3 Setting a heating function
1. Turn the knob for the heating
functions to select a heating function.
2. Turn the control knob to select the
temperature.
The lamp turns on when the oven
operates.
3. To turn off the oven, turn the knob
for the heating functions to the off
position.
6.4 Setting the function: True
Fan Cooking PLUS
This function increases humidity during
cooking.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns. After
the function stops, carefully open the
door.
1. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Advertisement
Table of Contents
