Table of Contents
Advertisement
Settings
Calibrate temperature
Using temperature calibration the
temperature can be modified, in all
modes and MasterChef programs, so
that it is slightly higher or lower than
shown.
The temperature calibration is
represented by a bar with seven
segments.
If all of the segments are filled the oven
temperature is much higher than
indicated in the display. If no segment is
filled the oven temperature is much
lower than indicated.
Select
or
, to adjust the
+
-
temperature calibration.
Confirm with OK.
Voltage
Setting the voltage (electrical version)
Select the desired voltage and
corresponding frequency.
Confirm with OK.
44
Showroom program
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo Mode
If you have demo mode activated
Demo mode active. The appliance will not
heat up
will appear when you turn on
the oven.
–
On
Press and hold OK for at least 4
seconds to activate demo mode.
–
Off
Press and hold OK for at least 4
seconds to deactivate demo mode.
The oven can then be used as
normal.
Factory default settings
–
Settings
Any settings that have been altered
will be reset to the factory default
setting.
–
Favorites
All favorites will be deleted.
–
Recommended Settings
Power levels which have been
changed will be reset to the factory
default settings.
–
Default Temperature
Any default temperatures that have
been changed will reset to the factory
default settings.
Advertisement
Table of Contents
