Home Connect Settings - Bosch NITP669SUC Use And Care Manual

Touch the kitchen timer key repeatedly until
3.
are displayed alternately.
lights up in the cooking zone display.
4. Set the value on the control panel.
and the symbol will flash on the cooking position
display.
5. Use the "Home Connect" SSID and the "Home
Connect" key to register the mobile device on the
cooktop network.
The cooktop is connected to the home network if the
symbol no longer flashes but lights up on the
cooking position display.
and The appliance automatically tries to connect to the
app, and
value flashes on the control panel.
6. Start the app on the mobile device and follow the
instructions for manual network registration.
The registration procedure has been completed once
the value appears on the cooking position display.

Home Connect Settings

You can adjust Home Connect to suit your requirements
at any time.
In the basic settings for your cooktop, navigate to the
Home Connect settings to display network and appliance
information.
Symbol Function
Registration in the home network (Wi-Fi)
Not connected /disconnect network.
Connect automatically.
Connect manually.
Connected.
Connection to app
Not connected.
Connect.
Connect to Wi-Fi
Radio module switched off.
Radio module switched on.
Settings via app
Switched off.
Switched on.*
Software update
Update available and ready for installation.
Starting installation.
Remote access by Customer Service
Not permitted.
Permitted.
* Basic setting
and are displayed alternately. The
25