Home Connect Settings - Bosch NIT8069SUC Use And Care Manual

Home Connect Settings

You can adjust Home Connect to suit your requirements
at any time.
In the basic settings for your cooktop, navigate to the
Home Connect settings to display network and appliance
information.
Symbol Function
•'‚
Registration in the home network (Wi-Fi)
Not connected /disconnect network.
‹
Connect automatically.
‚
Connect manually.
ƒ
Connected.
„
•'ƒ
Connection to app
Not connected.
‹
Connect.
‚
•'„
Connect to Wi-Fi
Radio module switched off.
‹
Radio module switched on.
‚
•'... Settings via app
Switched off.
‹
Switched on.*
‚
•'†
Software update
Update available and ready for installation.
‚
Starting installation.
ƒ
•'‡
Remote access by Customer Service
Not permitted.
‹
Permitted.
‚
•'ˆ
Wi-Fi signal strength
Not connected to home network (Wi-Fi).
‹
Signal strength 1 (poor)
‚
Signal strength 2 (moderate)
ƒ
Signal strength 3 (good)
„
•'‰
Connection to Home Connect server
Not connected.
‹
Connected.
‚
* Basic setting
Notes
The setting is only displayed if the appliance is
•'ƒ
▯
connected to the home network.
The setting is only displayed if the appliance has
•'„
▯
once connected to a network.
The setting is only displayed if an update is
•'†
▯
available.
The setting is only displayed if Customer Service
•'‡
▯
is attempting to connect to the appliance. You can end
this at any time after granting access.
22
The and settings are only displayed if there
•'ˆ •'‰
▯
is a connection to Wi-Fi.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the
Home Connect functions.
Note: In networked standby mode, your appliance
requires a maximum of 2 W.
Turn on the cooktop.
1.
Touch and hold the kitchen timer key for 4 seconds.
2.
The product information is displayed.
Touch the kitchen timer key repeatedly until
3.
are displayed alternately.
„
lights up in the cooking position display.
‚
Set the value on the control panel.
‹
4.
This deactivates Wi-Fi; the
control panel.
Disconnecting from the Network
You can disconnect your cooktop from the network at
any time.
Note: If your cooktop is disconnected from the network,
it is not possible to operate it using Home Connect.
Turn on the cooktop.
1.
Touch and hold the kitchen timer key for 4 seconds.
2.
The product information is displayed.
Touch the kitchen timer key repeatedly until
3.
are displayed alternately.
‚
lights up in the cooking position display.
„
Set the value on the control panel.
‹
4.
This disconnects the appliance from your home network;
the symbol will go out on the control panel.
D
Connecting to the network
Turn on the cooktop.
1.
Touch and hold the kitchen timer key for 4 seconds.
2.
The product information is displayed.
•'
symbol will go out on the
D
•'
C o n n e c t i n g t o t h e n e t w o r k
and
and