Table of Contents
Advertisement
Quick Links
OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
THANKS
OF A REMANUFACTURED PRODUCT.
To make sure you get the most out of
your product, be sure to register online at
to enjoy full product support.
R
CORDLESS CHAIN SAW – CORE TOOL
16-INCH | 40 V | 4.0 Ah
Model iON16CS-CT-RM
FOR
snowjoe.com
PASTE UPC LABEL HERE
YOUR
Form No. SJ-iON16CS-CT-RM-880E-V1
PURCHASE
Advertisement
Table of Contents
Related Manuals for SNOWJOE iON16CS-CT-RM
Summary of Contents for SNOWJOE iON16CS-CT-RM
- Page 1 16-INCH | 40 V | 4.0 Ah OPERATOR’S MANUAL Model iON16CS-CT-RM A Division of Snow Joe , LLC ® Form No. SJ-iON16CS-CT-RM-880E-V1 THANKS YOUR PURCHASE OF A REMANUFACTURED PRODUCT. To make sure you get the most out of your product, be sure to register online at snowjoe.com...
-
Page 2: General Power Tool Safety Warnings
OPERATOR’S MANUAL Model iON16CS-CT-RM A Division of Snow Joe , LLC ® Form No. SJ-iON16CS-CT-RM-880E-V1 IMPORTANT! • using the machine to lift, move, or split objects; • using the machine while fastened to fixed supports. Safety Instructions Improper use of the machine will invalidate the warranty,... -
Page 3: Chain Saw Safety Warnings
Snow Joe ® moving parts. Sun Joe customer service center at 1-866-SNOWJOE ® 7. If devices are provided for the connection of dust (1-866-766-9563). This will ensure that the safety of the extraction and collection facilities, ensure these are power tool is maintained. -
Page 4: Kickback Prevention
They must be purchased separately. The your cutting jobs free from accident or injury. iON16CS-CT-RM is compatible with the following batteries Kickback is the result of tool misuse and/or incorrect operating (models iBAT40 and iBAT40XR) and chargers (models procedures or conditions and can be avoided by taking proper iCHRG40 and iCHRG40QC). -
Page 5: Information About The Battery
® ® • Charge in a well-ventilated area – Do not block the 1-866-SNOWJOE (1-866-766-9563). charger vents. Keep them clear to allow for proper • Battery chemicals cause serious burns – Never let a ventilation. Do not allow smoking or open flames near a damaged battery pack contact the skin, eyes, or mouth. - Page 6 ® ® in overheating and cell damage. Never charge or work center at 1-866-SNOWJOE (1-866-766-9563). with batteries that have been overheated – replace them immediately, if possible. 3. Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with 7.
-
Page 7: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow Keep bystanders and children a all instructions in the user... -
Page 8: Technical Data
Know Your Cordless Chain Saw Read the owner’s manual and safety rules carefully before operating your cordless chain saw. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. -
Page 9: Carton Contents
+ Sun Joe customer service center at ® ® • 16 in. (405 mm) Oregon guide bar 1-866-SNOWJOE (1-866-766-9563). • Cutting bar sheath WARNING! Before mounting the bar and chain, make • Manual with registration card sure the battery (sold separately) is not inserted in its housing NOTE: In order to operate this cordless chain saw, you will and verify that the chain brake is not engaged. -
Page 10: Preparing To Work
You can purchase the Chain/sprocket required bar and chain oil at your local hardware store, end cover online at snowjoe.com, or via phone by calling the Chain tension Snow Joe + Sun Joe toll-free customer service center ®... -
Page 11: Adjusting The Chain Tension
(Fig. 7). IMPORTANT! Only use a good quality bar and chain oil, such as SWJ-OIL (visit snowjoe.com to purchase), designed specifically for use with chain saws to ensure optimal Fig. 7 lubrication of the cutting parts. -
Page 12: Battery Pack Operation
Battery Pack Operation • Use the battery charge indicator lights to determine when to charge your EcoSharp iBAT40 or EcoSharp ® ® iBAT40XR lithium-ion battery pack. The equipment is powered by a lithium-ion battery. The battery • You can "top-off" your battery pack's charge before starting pack is completely sealed and maintenance free. -
Page 13: Charging A Hot Or Cold Battery Pack
Hot or cold battery packs may take longer to charge. is wrong with the battery. Contact the Snow Joe + Sun Joe ® ® customer service center at 1-866-SNOWJOE (1-866-766-9563) Lithium-Ion Charging Status for assistance. Battery Pack Red Charger Charging... -
Page 14: Operation
+ Sun Joe customer service center at ® button 1-866-SNOWJOE (1-866-766-9563) for asistance. – when the machine is not in use. IMPORTANT! Always remember that an incorrectly used chain saw may disturb others and have a serious impact on the environment. -
Page 15: Cutting Techniques
Cutting Techniques • To avoid the risk of fire, do not leave the machine with the engine hot on leaves or dry grass. Before felling or delimbing for the first time, practice sawing WARNING! logs on the ground or on trestles, so that you can get familiar It takes specific training to use the machine with the machine and the most suitable sawing techniques. - Page 16 • Notching undercut • Limbing a tree Make the notch 1/3 the diameter of the tree, perpendicular to Limbing is the process in which branches are removed from a the direction of falls as illustrated (Fig. 17). fallen tree. When limbing, leave larger lower limbs to support the log off the ground.
- Page 17 ii) When the log is supported on one end (Fig. 19B), cut 1/3 – Repeat several times if necessary, changing the point the diameter from the underside (underbuck). Then make where you plant the spiked bumper. the finished cut by overbucking to meet the first cut. –...
-
Page 18: Maintenance
® ® warm, may be too tight upon cooling. Check the “cold tension” at 1-866-SNOWJOE (1-866-766-9563) for all maintenance before next use. The chain must be re-tensioned whenever the operations not foreseen in this manual. Any operation flats on the drive links hang out of the bar groove (Fig. 21). - Page 19 An authorized service center will sharpen the chain using the – the length of the cutting edges decreases to 5 mm or less; right tools to ensure minimum removal of material and even sharpness on all the cutting edges. – there is too much play between the links and the rivets. If you sharpen the chain yourself, use special round-section files with the right diameter depending on the type of chain Fig.
-
Page 20: Bar Maintenance
• the inside of the guide is worn enough to make the chain lean to one side. You can purchase replacement parts for your iON16CS-CT-RM chain saw by ordering online at snowjoe.com or via phone by Tension contacting the Snow Joe... -
Page 21: Model And Serial Numbers
Repair or replace any faulty parts on the unit. Store the machine in a dry, locked place out of the reach of children. Support If your Sun Joe iON16CS-CT-RM cordless chain saw requires ® service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Model and Serial Numbers... -
Page 22: Troubleshooting
Troubleshooting Fault Possible Cause Remedy The motor does not start • No battery or not • Make sure that the battery is inserted correctly inserted correctly when you switch it on • Battery exhausted • Check charge status and recharge the battery The motor stops •... - Page 23 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
- Page 24 NOTES...
- Page 25 We’re here to help Monday through Friday from 9AM to 6PM EST. You can reach us at 1-866-SNOWJOE (1-866-766-9563), online EXCLUSIONS: at snowjoe.com, via email at help@snowjoe.com or tweet us • Wearing parts like belts, augers, chains and tines are @snowjoe.
- Page 26 snowjoe.com...