Table of Contents
Advertisement
Quick Links
OPERATOR'S MANUAL
OPERATOR'S MANUAL
A Division of Snow Joe
A Division of Snow Joe
, LLC
, LLC
®
®
THANKS
OF A REMANUFACTURED PRODUCT.
To make sure you get the most out of
your product, be sure to register online at
to enjoy full product support.
CORDLESS CHAIN SAW
CORDLESS CHAIN SAW
R
R
40-VOLT | 16-INCH
40-VOLT | 16-INCH
Model iON16CS-RM
Model iON16CS-RM
FOR
snowjoe.com
PASTE UPC LABEL HERE
YOUR
Form No. SJ-iON16CS-RM-880E-V1
Form No. SJ-iON16CS-RM-880E-V1
PURCHASE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SNOWJOE Sunjoe iON16CS-RM
Summary of Contents for SNOWJOE Sunjoe iON16CS-RM
- Page 1 Form No. SJ-iON16CS-RM-880E-V1 Form No. SJ-iON16CS-RM-880E-V1 THANKS YOUR PURCHASE OF A REMANUFACTURED PRODUCT. To make sure you get the most out of your product, be sure to register online at snowjoe.com to enjoy full product support. PASTE UPC LABEL HERE...
-
Page 2: General Power Tool Safety Warnings
CORDLESS CHAIN SAW 40-VOLT | 16-INCH OPERATOR’S MANUAL Model iON16CS-RM A Division of Snow Joe , LLC ® Form No. SJ-iON16CS-RM-880E-V1 IMPORTANT! • sectioning furniture or other materials with nails, screws or other metal components; Safety Instructions • butchering meat; •... -
Page 3: Chain Saw Safety Warnings
® ® extraction and collection facilities, ensure these are 1-866-SNOWJOE (1-866-766-9563). This will ensure properly connected and used. Use of dust collection that the safety of the power tool is maintained. devices can reduce dust-related hazards. -
Page 4: Causes And Prevention Of Kickback
and/or throw the chain saw out of control. • Always observe the safety regulations and follow the correct sawing techniques. • Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be • Ensure safe carrying of the chain saw. Whenever the whipped toward you or pull you off balance. -
Page 5: Information About The Battery
+ Sun Joe customer service center ® ® meter or those that have been exposed to violent shocks, at 1-866-SNOWJOE (1-866-766-9563). even if the housing of the battery pack appears to be undamaged. The battery cells inside the battery may have... -
Page 6: Protection From Environmental Influences
® ® with batteries that have been overheated – replace them center at 1-866-SNOWJOE (1-866-766-9563). immediately, if possible. 3. Electrical plugs must match the outlet. Never modify 7. Store the charger and your cordless tool only in dry the plug in any way. -
Page 7: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S DANGER! ROTATING MANUAL(S) –... -
Page 8: Technical Data
Know Your Cordless Chain Saw Read the owner’s manual and safety rules carefully before operating your cordless chain saw. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. -
Page 9: Carton Contents
® ® • EcoSharp battery charger ® 1-866-SNOWJOE (1-866-766-9563). • 16 in. (40.6 cm) chain (pre-mounted) WARNING! Make sure the battery is not inserted in its • 16 in. (40.6 cm) guide bar (pre-mounted) housing. • Cutting bar sheath Before fitting the guide bar, make sure the chain brake is not •... -
Page 10: Preparing To Work
3. Mount the guide bar by inserting the stud bolt into the 6. Raise the guide bar and tighten the chain tension bar’s hole using the tension adjuster; move the bar adjustment knob securely (Fig. 6). towards the back of the machine body (Fig. 3). Fig. -
Page 11: Adjusting The Chain Tension
Adjusting the Chain Tension To check that the brake works efficiently, proceed as follows: WARNING! – Start the motor, and holding the front hand grip, push Before performing any checks, the front hand guard forward. adjustments, repairs or maintenance on the machine, make sure the battery is not inserted in its housing. -
Page 12: Battery Pack Operation
Battery Pack Operation • Use the battery charge indicator lights to determine when to charge your EcoSharp iBAT40 lithium-ion battery pack. ® The equipment is powered by a lithium-ion battery. The battery • You can "top-off" your battery pack's charge before starting pack is completely sealed and maintenance free. -
Page 13: Charging A Hot Or Cold Battery Pack
If there is only a red blinking light, this indicates that something is wrong with the battery. Contact Snow Joe ® Battery Pack Red Charger Charging Sun Joe customer service at 1-866-SNOWJOE ® Temperature Indicator Light Status (1-866-766-9563). Too hot... -
Page 14: Stopping The Machine
® ® + Sun Joe customer service center at ® 1-866-SNOWJOE (1-866-766-9563) for asistance. – when the machine is not in use. Safety lock IMPORTANT! Always remember that an incorrectly used chain button saw may disturb others and have a serious impact on the environment. -
Page 15: Cutting Techniques
Checks During Work • Felling a tree i) When bucking and felling are performed by two or more • Checking the chain tension people at the same time, the felling operation should be The chain tends to stretch gradually as you work, so you need separated from the bucking operation by a distance of at to check its tension frequently. - Page 16 Make the lower horizontal notching cut first. Follow the simple directions for easy cutting. i) When the log is supported along its entire length as This will help to avoid pinching either the saw chain or the illustrated (Fig. 19A), it is cut from the top (overbuck). guide bar when the second notch is made.
-
Page 17: Maintenance
Snow Joe + Sun Joe customer service center ® ® at 1-866-SNOWJOE (1-866-766-9563) for all maintenance operations not foreseen in this manual. Any operation performed in an unauthorized service center or by unqualified personnel will completely invalidate the warranty. WARNING! For your safety and that of others: •... -
Page 18: Chain Brake
+ Sun Joe ® ® ® ® tooth customer service center at 1-866-SNOWJOE (1-866-766-9563). Sharpening is necessary when: • The sawdust looks like dust. Cutting edge • Cutting becomes more difficult. Depth limiter tooth • The cut is not straight. -
Page 19: Bar Maintenance
“Bar and Chain Mounting” You can purchase replacement parts for your iON16CS section. chain saw by ordering online at snowjoe.com or, to order by phone, contact Snow Joe + Sun Joe customer service at ®... -
Page 20: Chain Sprocket
Support If your Sun Joe iON16CS-RM cordless chain saw requires ® service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Model and Serial Numbers When contacting the company, reordering parts or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. -
Page 21: Troubleshooting
Troubleshooting Fault Possible Cause Remedy The motor does not start • No battery or not • Make sure that the battery is inserted correctly inserted correctly when you switch it on • Battery exhausted • Check charge status and recharge the battery The motor stops •... - Page 22 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe . Accessories ® ® can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer service center ® ®...
- Page 23 We’re here to help Monday through Friday from 9AM to 6PM EST. You can reach us at 1-866-SNOWJOE (1-866-766-9563), online EXCLUSIONS: at snowjoe.com, via email at help@snowjoe.com or tweet us • Wearing parts like belts, augers, chains and tines are @snowjoe.
- Page 24 snowjoe.com...
Need help?
Do you have a question about the Sunjoe iON16CS-RM and is the answer not in the manual?
Questions and answers