Copying Pictures On A Memory Card To A Cassette - Panasonic PV-DV952 Operating Instructions Manual

1
MPEG4
VOICE
STILL
CARD MODE
3, 4,
MULTI/P-IN-P
2, 4
1
PICTURE
640 640
640 640
No.25
2 3
5
4
PHOTO
SHOT
TAPE CARD
1
MPEG4
VOICE
STILL
2
CARD MODE
3
1
40
ª To Select a Desired File and Play it Back
After setting the Palmcorder to the Card Playback Mode (l 39).....
1
Slide the [STILL/MPEG4/VOICE] Selector to desired type of
data.
2
Press the [MULTI] Button.
≥The files recorded on the Memory Card are displayed in Multi-Picture
3
Rotate the [PUSH] Dial and select a desired file.
≥The selected file is marked with a red frame.
≥When 7 or more files have been recorded, rotate the [PUSH] Dial to
MENU
SHUTTER/IRIS/VOL/JOG 4
Press either the [PUSH] Dial or the [MULTI] Button.
≥The selected file is shown on the entire screen.
PUSH
2
File Size (When [STILL] is selected at Step 1)
3
File Number
4
Folder-File Number (When [STILL] or [MPEG4] is selected at Step 1)
ª Using File Search Mode
1 1 1 1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH] >> [YES].
≥The file search screen
2 2 2 2
Rotate the [PUSH] Dial to select the desired number of the
file and then press it.
≥The selected number's file appears.
≥The same process can be performed using the short-cut menu (l 18).
≥For other notes, see page 64.
~~~~~~~~~~~~~~~~~~~~~~~~
Copying pictures on a Memory Card to a
640
Cassette
640
After setting the Palmcorder to the Card Playback Mode (l 39).....
100-0012
To Copy One Picture
4
1
Slide the [TAPE/CARD] Selector to [TAPE].
2
Slide the [STILL/MPEG4/VOICE] Selector to [STILL].
3
Display a desired picture.
≥Please refer to "To select a Desired File and Play it Back".
4
Press the [PHOTO SHOT] Button.
No.3
≥It takes approximately 7 seconds to copy a still picture to the Cassette.
≥During the copying, the Indication
To Copy All the Pictures
1 1 1 1
Display the first picture.
≥If a picture other than the first one is displayed, only the subsequent
2 2 2 2
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[RECORD TO TAPE] >> [YES].
≥It takes approximately 7–11 seconds for each picture to be copied to
≥During the copying, the Indication
≥When recording to tape, select the tape position before recording. The
picture will be recorded to the tape position when the [PHOTO SHOT]
button is pressed at step 4.
MENU
≥When pictures with a size other than [640k480] are copied to the cassette,
their pictures quality will deteriorate slightly.
≥Picture size recorded on tape is [640k480]. (Cannot save as mega-pixel
SHUTTER/IRIS/VOL/JOG
still picture)
PUSH ≥Moving Picture (MPEG4) and Voice data cannot be recorded from a card to
tape.
≥When recording the Card Images on a Tape, a PhotoShot index signal is
automatically recorded with a picture.
≥Even if you edit the Slide Show, it is not applied to the order in copying the
pictures.
≥For other notes, see page 63.
1
Mode.
display the next file. The Operation Lever (towards [6] or [5])can
be used instead of the [PUSH] Dial.
5
appears.
pictures will be copied.
the cassette. To stop the copying midway, press the [∫] Button.
1
appears.
1
appears.