Camera Mode; Recording - Panasonic PV-DV952 Operating Instructions Manual

2
TAPE
CARD
1
CAMERA
VCR
CARD P.B.
MODE
ON
OFF
POWER
1
2 4
REC
RECORD
3, 4
6
x
°
20

Recording

1
Set the [OFF/ON/MODE] Switch to [ON].
≥The [CAMERA] Lamp lights up.
2
Slide the [TAPE/CARD] Selector towards [TAPE].
3
Press the Recording Start/Stop Button.
≥Recording starts.
≥After the [RECORD] Indication is displayed, it changes to [REC].
≥The Tally Lamp (LED Lamp)
PAUSE
4
Press the Recording Start/Stop Button again to pause the
recording.
PAUSE
≥[PAUSE] Indication is displayed.
≥If the Recording Pause Mode continues for more than 5 minutes, the power
is turned off automatically for tape protection and power conservation. To
resume recording from this condition, turn on the power again.
≥When recording while the Mode Selector Switch is set to [AUTO]
Palmcorder automatically adjusts the focus and white balance. (In some
cases, they cannot be adjusted automatically and need to be adjusted
manually.) (l 24, 26)
3
ª To Check the Recording
By pushing the Operation Lever towards [S]
REC/PAUSE
Mode, you can play back the last few seconds of the recorded scene.
3, 4
≥[CHK] is displayed. After checking, the Palmcorder resumes the Recording
Pause Mode.
ª To View the recorded scene while the Recording is
paused (Camera Search)
The recorded scene can be viewed by holding down the Operation Lever
towards [j]
The Camera Search function is useful for finding the starting point of a new
scene to create a smooth transition from one scene to another.
5
≥When the Operation Lever is pushed towards [j], images are played back
AUTO
in the reverse direction.
MANUAL
≥When the Operation Lever is pushed towards [i], images are played back
AE LOCK
in the forward direction.
ª Self-Recording
7
By opening the LCD Monitor and turning it so that it faces forward (to the lens
side), you can let the subject in front of the Palmcorder monitor the shot while
shooting is in progress.
SEARCH
≥When the LCD Monitor is opened, the Viewfinder is disabled automatically.
8
However, when the LCD Monitor is rotated forward, the image is also
shown in the Viewfinder.
≥If you prefer to have the image on the LCD Monitor to look like an image in
x
a mirror, set [SELF-REC] on the [OTHER FUNCTIONS] Sub-Menu to
°
[MIRROR]. (Mirror Mode)
Images are recorded normally and no left and right reversal occurs.
≥If [MIRROR] is selected, only recording Indication [¥], recording pause
Indication [¥;], Card PhotoShot Indication [
Power Indication [x] are displayed
Indication [°] appears, return the LCD Monitor to the original position in
order to check the specific content of the Warning/Alarm Indication.
ª To Finish the Recording
Set the [OFF/ON/MODE] Switch to [OFF].
≥For other notes, see page 60.

CAMERA Mode

those being recorded that recording is in progress. The Tally Lamp
does not light up if the [TALLY LED] on the [OTHER FUNCTIONS]
Sub-menu is set to [OFF].
6 7
or [i] in the Recording Pause Mode.
1
3
lights up during recording and alerts
4
6
in the Recording Pause
] and Remaining Battery
8
. If a general Warning/Alarm
2
5
, the