Special Features; Using A Memory Card; Recording On The Memory Card - Panasonic PV-DV952 Operating Instructions Manual

5
PHOTO
SHOT
TAPE CARD
1
MPEG4
VOICE
STILL
2
CARD MODE
3, 4
3, 4
F 7
640
PICTURE
36
1
OPEN

Using a Memory Card

A Card can be used to record files or play back files.
≥Use genuine SD Memory Card or MultiMediaCard only.
ª Inserting a Card
Before inserting a Card, be sure to turn off the Palmcorder.
2
1
Slide the [OPEN] Lever to the right and open the Card Slot
Cover.
1
2
While holding the Card with its cut corner facing right
insert it into the Card Slot.
3
Close the Card Slot Cover.
Taking out a Card
3 Open the Card Slot cover and push the side of the card in the middle and
then pull it straight out to remove the card.
≥After removing the card, close the Card Slot cover.
2
ª [ACCESS] Lamp
While the Palmcorder is accessing the Card (reading, recording, playback,
erasing, moving of images), the [ACCESS] Lamp
≥While the [ACCESS] Lamp is on, never attempt to: open the Card Slot
Cover, pull out the Card, turn off the Palmcorder power, or switch the
[TAPE/CARD] Selector. Such actions will damage the Card and cause the
Palmcorder to malfunction.
~~~~~~~~~~~~~~~~~~~~~~~~

Recording on the Memory Card

Three kinds of data can be recorded by selecting with the
[STILL/MPEG4/VOICE] Selector. When recording still pictures, select [STILL]
(Card PhotoShot), when recording moving pictures, select [MPEG4] (MPEG4
Recording), when recording voice, select [VOICE] (Voice Recorder Function).
≥If the [TAPE/CARD] Selector is set to [CARD], the Palmcorder is
automatically turned off when you leave it for about 5 minutes without
performing any PhotoShot recording.
≥When the [TAPE/CARD] Selector is set to [CARD], you cannot record to the
MENU
Tape.
ª Card PhotoShot
SHUTTER/IRIS/VOL/JOG Still pictures can be recorded on the Memory Card from the Palmcorder lens
as well as from scenes that have already been recorded on a cassette.
PUSH
The size of images that are recorded using this Palmcorder is approximately
1,680,000 pixels. Recording of images with a size that is larger than a million
pixels is called mega-pixel still-picture recording. Compared to images of
normal recording, images that are created by mega-pixel still-picture
recording can be printed out more clearly.
Recording from the Palmcorder Lens (Camera Mode)
1
Slide the [TAPE/CARD] Selector to [CARD].
2
Slide the [STILL/MPEG4/VOICE] Selector to [STILL].
3
Set [CAMERA FUNCTIONS] >> [CARD SETUP] >>
[PICTURE SIZE] >> [1488k k k k 1128] or [640k k k k 480].
4
Set the [PICTURE QUALITY] to desired picture quality.
5
Press the [PHOTO SHOT] Button.
≥The [
≥Mega-pixel recording (when you select [1488k1128] in step 3) is useful for
taking clear pictures, but the following functions are disabled during mega-
pixel recording.
≥Digital zooming (l 22)
≥Digital Effect functions (l 28, 29)
≥Title In/Creation (l 42)
≥The power is automatically turned off after about 5 minutes when a card has
been inserted.
≥When recording dark scenes, set [LOW LIGHT SHOT] on the
[CARD SETUP] to [AUTO] and then record. (l 63)

Special Features

] Indication will light in red.
PICTURE
1
,
2
lights up.