Index Search Functions - Panasonic PV-DV952 Operating Instructions Manual

2
DATE/
OSD TIME
COUNTER RESET
MULTI/
REC
P-IN-P ¥
V /REW PLAY
3
6 1
STILL ADV PAUSE
4
E
;
INDEX STOP
2
K
∫
SELECT
VAR.
SEARCH
STORE
OFF/ON
P.B.DIGITAL
INDEX
1
S 1
2
32

Index Search Functions

To facilitate searching of desired scene, this Palmcorder automatically
records index signals during recording, as explained in the following.
MENU
PhotoShot Index Signal
1
These signals are automatically recorded whenever still pictures are taken in
PhotoShot Mode (l 21).
When recording still pictures using the Continuous PhotoShot Mode (l 21),
SHUTTER/IRIS/VOL/JOG
the index signal is not recorded.
1
Scene Index Signal
PUSH
Scene Index Signals are automatically recorded when you start recording
after inserting a Cassette.
However, if the Palmcorder is switched from the VCR Mode to Camera Mode
or if the date and time is set before the start of recording, the index signal is
not recorded.
≥If [INDEX] of [RECORDING SETUP] Sub-Menu on the
START/
PHOTO
STOP
SHOT
[CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index signal is
TITLE
ZOOM recorded when Recording is restarted after a lapse of 2 hours or longer. If it
T
is set to [DAY], an index signal is recorded when recording is restarted after
A.DUB
the date has changed since the last recording. (While the index signal is
FF/ W
W
recorded, the [INDEX] Indication
5
STILL ADV
D
ª PhotoShot Index Search
INDEX
1
L
1
P.B.
ZOOM
MENU
2
SET
ITEM
≥With each press of the corresponding button, still pictures recorded in
PhotoShot Mode are searched.
≥After Pictures with Sounds are played back for 4 seconds, the Palmcorder
switches to the Still Playback Mode.
ª Scene Index Search
1
2
≥When the corresponding Button is pressed once, the [S 1] Indication
appears, and searching of the subsequent scene marked with an index
signal starts. Each time the button is pressed after the start of Scene Index
Search, the indication changes from [S 2] to [S 9], and the beginning of the
scene corresponding to the selected number will be searched. After
reaching the desired scene, playback starts automatically.
≥Up to 9 scene numbers can be selected.
Top Scan
If the [
the Palmcorder will scan for scenes (or PhotoShots) and playback the first
few seconds of each. (To cancel, press the [
4
≥For other notes, see page 62.
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[INDEX] >> [PHOTO].
Press the [9] Button
Remote Controller.
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[INDEX] >> [SCENE].
Press the [9] Button
Remote Controller.
9 :
] Button or the [
.)
1
flashes for a few seconds.)
:
1
or the [ ] Button
:
1
or the [ ] Button
] Button is pressed for more than 2 seconds,
1 3
] Button
2
on the
2
on the
2
∫
or the [ ] Button