Epson V11H923620 User Manual page 54

5. Select Projector Name and enter a name up to 16 alphanumeric characters long to identify the
projector on a network.
6. Set the Priority Control Interface setting to Wired LAN.
7. Select the Wired LAN menu and press
8. Select IP Settings and press
9. Select your IP settings as necessary:
• If your network assigns addresses automatically, turn on the DHCP setting.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, and Gateway Address as needed.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press
Num button on the remote control while entering the desired numbers.
10. To prevent display of the IP address on the standby screen, turn off IP Address Display in the
Wired LAN menu.
11. Select Return and press
12. Select Network Projection and press
You see a screen like this:
13. Turn on the Projector Keyword setting if you want to prevent access to the projector by anyone not
in the room with it.
Enter.
Enter.
Enter to return to the Network Settings menu.
Enter.
54
Enter. Alternatively, press and hold the