Table of Contents
Advertisement
Setting
HDBaseT
HDMI EQ Setting
Reset Signal I/O Settings
Parent topic:
Installation Settings - Installation Menu
Settings on the Installation menu let you set up your projector for your installation environment. The
available settings depend on the currently selected input source and other settings.
Options
Connect ELPHD02
Control Communications
Extron XTP
1
2
3
Adjusting the Menu Settings
Description
Connect ELPHD02: set to On to use the
optional HDBaseT control pad. Make
sure this setting is disabled if you are not
using an HDBaseT control pad.
Control Communications: enables or
disables communication from the
Ethernet and serial ports on the
transmitter; turning on this setting
disables the projector's LAN and RS-
232C ports (Connect ELPHD02 and
Extron XTP must be turned off to use
this setting)
Extron XTP: set to On when you connect
an Extron XTP transmitter or switcher to
the HDBaseT port
Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
occurs, such as no image being
projected, change the setting.
Resets all settings on the Signal I/O
menu to their default values
208
Advertisement
Table of Contents
