Epson V11H923620 User Manual page 114

1. Turn on the projector and display an image.
2. Adjust the image size using the W (Wide) and T (Tele) buttons.
After you adjust the image size, the Image Shift screen is displayed automatically.
3. Use the arrow buttons on the projector or remote control to adjust the image position.
Note: You can also use the Installation menu to adjust the Image Shift setting.
4. Press Esc to close the Image Shift screen. The screen closes if no operation is performed for
approximately 10 seconds.
Note: The Image Shift setting is retained even if the projector is turned off; however, you need to
readjust the image position if you change the projector's location or angle.
Parent topic: Using Basic Projector Features
Related references
Installation Settings - Installation Menu
114